banner
Pcb circuit board production process

340 Published by FASTPCBA 11月 27,2018

Pcb circuit board production process

1, Contact pcb manufacturer

You need to contact the manufacturer first, then register the customer number, and someone will give you a quote, place an order, and follow up on the production schedule.

2, Pcb cutting

Objective: according to the requirement of project data MI, to cut into small pieces on the large sheet.According to the customer’s requirements of small board.Process: big board material, cut board according to MI request, curium board, beer rounded edge grinding, out board 

3, Pcb drilling

Objective: according to the engineering data, drill the desired hole diameter at the corresponding position on the sheet material with the required size.Procedure: laminated plate pin, upper plate, drilling hole, lower plate, inspection and repair

4,  Pcb sink copper

Objective: to deposit a thin layer of copper on the wall of insulating hole by chemical method.Process: rough grinding, hanging plate, sinking copper automatic line, lower plate, dipping rare H2SO4, thickening copper

5, Graph transfer

Purpose: graphic transfer is the transfer of images on the production film to the boardProcess: (blue oil process) : grinding plate, printing on the first side, drying, printing on the second side, drying, lighting, stamping, inspection.(dry film process) : hemp plate, pressing film, static position, exposure, static position, impact shadow, inspection

6, Figure plating

Objective: pattern electroplating is to electroplate a layer of copper to the required thickness and a layer of gold, nickel or tin to the bare copper or hole wall of the circuit diagram.Process: upper plate – oil removal – washing second – microetching – washing – pickling – copper plating – washing – pickling – tin plating – washing – washing – lower plate 

7, Membrane

Objective: to isolate the non – line copper layer by using NaOH solution.Process: water film: socket – soaking-washing – scrubbing – passing machine;Dry film: put plate – over machine

8, Eetching

Purpose: etching is to use chemical reaction method to corrode the copper layer of non-line part.

9, Green oil

Objective: green oil is to transfer the graph of green oil film to the plate, which can protect the circuit and prevent the tin on the circuit when welding partsProcess: grinding plate, printing green oil, curium plate, exposure, stamping;Grinding plate – first printing plate – second printing plate – second printing plate 

10, Character

Purpose: the character is provided as an identifiable markProcess: after the final curium of green oil, cooling and static setting, adjusting the network, printing characters, after curium

 11, Pcb gold fingers

Objective: to coat the plug finger with a required thickness of nickel and gold to make it harder to wearProcess: upper plate – oil removal – washing twice – microetching – washing twice – pickling – copper plating – washing – nickel plating – washing – gold plating

Purpose: the purpose of tin spraying is to spray a layer of lead tin on the exposed copper surface that is not covered with resistance soldering oil to protect the copper surface from corrosion and oxidation, so as to ensure good welding performance.Process: micro etching, air drying, preheating, rosin coating, solder coating, hot air leveling, air cooling, washing and air drying 

12,  Molding

Objective: to make the shape shaping method for customers through mold stamping or CNC gong machineNote: data gongs and the precision of the board and the board of the upper hand gong, the next, the minimum cutting board can only do some simple shape.

13, Pcb testing

Objective: to detect the defects that affect functional ability by electronic 100% test.Procedure: upper mold, put plate, test, qualified, FQC eye inspection, unqualified, repair, return test, OK, REJ, scrap

14,  Pcb final inspection

Objective: to prevent defects and defects from coming out through 100% inspection of appearance defects and repair of minor defects.Specific working procedure: incoming material, checking data, eye inspection, FQA sampling inspection, packaging, disqualification, treatment, inspection

PCB manufacturer reflow soldering machine heating system

PCB manufacturer reflow soldering machine heating system   The full hot air and infrared hea...

Do you like ? 233

Read more
Types and advantages of flexible pcb circuit board

Types and advantages of flexible pcb circuit board The PCBA board is the finished product after t...

Do you like ? 330

Read more
What are the SMT process

What are the  SMT process Everyone knows that the electronic products we use in our lives are ass...

Do you like ? 998

Read more
What is the difference between PCB and PCBA

What is the difference between PCB and PCBA What is a PCB PCB = printed circuit board; PCB is an ...

Do you like ? 891

Read more